The Ford Barn - View Single Post - NewRex Ignition Switch with Auxiliary Position

Curtis in MA · 02-12-2021, 01:29 PM

The wiring change seems simple enough.
First disconnect the battery!
Take the two wires on the ignition switch and connect them together.
The wire that goes from the ammeter back to the right side of the terminal box, disconnect from the ammeter and connect to the ACC on the new switch.
Connect a short wire from the ammeter to the BAT.
Connect another wire from the Coil position to the actual coil (or to the wire that went from the terminal box to the coil).

02-12-2021, 01:29 PM	#5
Curtis in MA Senior Member Join Date: Oct 2017 Location: Leicester, MA Posts: 298	Re: NewRex Ignition Switch with Auxiliary Position The wiring change seems simple enough. First disconnect the battery! Take the two wires on the ignition switch and connect them together. The wire that goes from the ammeter back to the right side of the terminal box, disconnect from the ammeter and connect to the ACC on the new switch. Connect a short wire from the ammeter to the BAT. Connect another wire from the Coil position to the actual coil (or to the wire that went from the terminal box to the coil).