Thread
:
king pin fit
View Single Post
12-13-2018, 09:56 AM
#
4
Bob Bidonde
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,502
Re: king pin fit
Pins should be 0.812" OD. The bushing reamer is 0.814" OD. Allowing for some wear of the reamer, I would expect a reamed set of bushings would be 0.813" to 0.815" ID.
__________________
Bob Bidonde
Bob Bidonde
View Public Profile
Find More Posts by Bob Bidonde