[Beater]

ok thanks for the pic yea the baffle had come dislodged and was floating around in there making things worse actually. I reached in with a needle nose and rolled it up took it out I cut a plastic ring out of a oil jug and put that in for a cap gasget and it seems ok. I also bent the overflow tube up as high as I could get it after thinking and looking and decideing, I also cut another circle out of the other side of the oil jug, and then a small enough hole on the outside for the overflow tube to go through, then pressed it in and set it on the shelf of the rad neck that inch bellow took it for a drive with the rad right full, no more water out cap, and after it found its home, no more water out the overflow pipe