View Single Post
Old 03-21-2015, 01:44 PM   #10
DirtyDuck
Junior Member
 
Join Date: Mar 2015
Posts: 13
Default Re: Dead 6V battery, 12V jump start with pos and neg wrong

In my case the rear terminal is (-), but goes to the starter, the front terminal is (+) and goes to the ground strap (kind of copper mesh flat wire). I have no clue why the previous owner did it this way instead of turning the battery 180 degrees and use shorter wires, but it's definitively a positive ground.
DirtyDuck is offline   Reply With Quote