The Ford Barn - Cluster Gear ID

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Cluster Gear ID (https://www.fordbarn.com/forum/showthread.php?t=336841)

Seth Swoboda

03-19-2024 08:10 AM

Cluster Gear ID

3 Attachment(s)

Can anyone idendify this cluster gear for me? The hole in the center is 3/4 in. It is very similar to a V8 60 cluster gear. The burs on the end gear are throwing me off. Thanks.

Terry,OH

03-19-2024 09:15 AM

Re: Cluster Gear ID

The teeth at the end of the gear hold a thrush washer in place. Gear appears early like 35-36

petehoovie

03-19-2024 11:22 AM

Re: Cluster Gear ID

Quote:

Originally Posted by Seth Swoboda (Post 2298735)

Can anyone idendify this cluster gear for me? The hole in the center is 3/4 in. It is very similar to a V8 60 cluster gear. The burs on the end gear are throwing me off. Thanks.

https://www.fordbarn.com/forum/attac...3&d=1710853766

https://www.fordbarn.com/forum/attac...4&d=1710853766

https://www.fordbarn.com/forum/attac...5&d=1710853766

Mac VP

03-20-2024 04:47 AM

Re: Cluster Gear ID

Post the tooth count. We should be able to figure out exactly which gear it is.

Seth Swoboda

03-20-2024 08:56 AM

Re: Cluster Gear ID

Quote:

Originally Posted by Mac VP (Post 2298950)

Post the tooth count. We should be able to figure out exactly which gear it is.

Looks like the big gear is 29 tooth. If you need the other tooth counts I'll get them at lunch today.

rotorwrench

03-20-2024 10:40 AM

Re: Cluster Gear ID

Part straight cut spur gears puts it in the pre-1936 area for passenger cars. Pickups may have had spur gears for a bit longer but most went to helical after the start of the 1936 model year.

Seth Swoboda

03-20-2024 07:40 PM

Re: Cluster Gear ID

29-19-17-13 are the tooth counts. This is V8 60 I believe???

All times are GMT -5. The time now is 03:58 PM.