Where did my compression go I have a motor that ran very good, we have let it sit for several years now there is no compression in any of the cylinders. Is there any thing I can add to the cylinders I assume it has to be the rings. Thanks
|
Re: Where did my compression go Put some MMO into the cylinders and let it soak for a day...try again
|
Re: Where did my compression go Take plugs out and look to see if valves are all moving
|
Re: Where did my compression go I agree with Kurt, stuck valves. We had one with two dead cylinders just the other day. Exhaust valves stuck open.
|
Re: Where did my compression go There is recent thread regarding this that wa started by Grampy.
|
Re: Where did my compression go Quote:
|
Re: Where did my compression go When I bought my 31 Town Sedan it had no compression also. It sat in a garage for several years, and I found the teeth were stripped off part of the cam gear, so it didn't rotate.
Watch the distributor rotor to make sure the cam is turning. |
All times are GMT -5. The time now is 05:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.