The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Zenith 19322 Carb -Auto Technology (https://www.fordbarn.com/forum/showthread.php?t=18567)

Domino 10-24-2010 10:31 AM

Zenith 19322 Carb -Auto Technology
 

I finally got to test drive the tudor with the 19322 zenith installed. Wow what a difference. The pickup is significantly better and the top end speed is unknow. I got the car up to around 52 with plenty of pedal left. I wasn't comfortable going any faster as the brakes on an A are limited and the front end tends to float a bit at speeds over 50 - 55. This carb replaced was is rebuilt Tilly and there is quite an improvement over it. I am curious as to the gas milage it will deliver. I am so pleased that , I may purchase another for the green fordor. God speed at under 50 mph.

Jim/GA 10-24-2010 12:48 PM

Re: Zenith 19322 Carb -Auto Technology
 

Is this the modern forklift engine carb we have seen and heard about? I do not remember numbers very well.

Tom Wesenberg 10-24-2010 01:05 PM

Re: Zenith 19322 Carb -Auto Technology
 

Quote:

Originally Posted by Jim/TX (Post 101543)
Is this the modern forklift engine carb we have seen and heard about? I do not remember numbers very well.

I'll bet you could remember 36-24-34. LOL:)

Domino 10-24-2010 01:45 PM

Re: Zenith 19322 Carb -Auto Technology
 

Yes it is! Several asked to hear how it worked for I posted my findings.


All times are GMT -5. The time now is 10:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.